Four row cylindrical roller bearings
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
Bearing features
- Enhanced operational reliability
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film. - Separable and interchangeable
The separable components of SKF four-row cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections. - High speed capability
The cage designs are suitable for high speeds, rapid accelerations and peak loads. - Low cross-sectional height
The low cross-sectional height of four-row cylindrical roller bearings allows for relatively large roll neck diameters compared to the roll diameter.
- Bearing FCD84124300
- 1 pcs
- Negotiable
- Bearing FC223492
- 1 pcs
- Negotiable
- Bearing FCDP170230650/YA6
- 1 pcs
- Negotiable
- Bearing FC3451180/YA3
- 1 pcs
- Negotiable
- Bearing FCD4462204/YA3
- 1 pcs
- Negotiable
- Bearing FC4460190
- 1 pcs
- Negotiable
- Bearing FCDP200272800/YA6
- 1 pcs
- Negotiable
- Bearing FC4258192A/YA3
- 1 pcs
- Negotiable
- Bearing FC3446130
- 1 pcs
- Negotiable
- Bearing FC3450170/YA3
- 1 pcs
- Negotiable
- Bearing FCD5276280A
- 1 pcs
- Negotiable
- Bearing FC3450170/YA3
- 1 pcs
- Negotiable