Four row cylindrical roller bearings
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
Bearing features
- Enhanced operational reliability
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film. - Separable and interchangeable
The separable components of SKF four-row cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections. - High speed capability
The cage designs are suitable for high speeds, rapid accelerations and peak loads. - Low cross-sectional height
The low cross-sectional height of four-row cylindrical roller bearings allows for relatively large roll neck diameters compared to the roll diameter.
- Bearing FCDP2703701150/YA6
- 1 pcs
- Negotiable
- Bearing FCDP112160600/YA6
- 1 pcs
- Negotiable
- Bearing FCDP100144400
- 1 pcs
- Negotiable
- Bearing FCDP96136500A/YA6
- 1 pcs
- Negotiable
- Bearing FC7496230/YA3
- 1 pcs
- Negotiable
- Bearing FCDP130180650/YA6
- 1 pcs
- Negotiable
- Bearing FCDP4872290/YA3
- 1 pcs
- Negotiable
- Bearing FCDP88128420/YA3
- 1 pcs
- Negotiable
- Bearing FCDP96136420/YA6
- 1 pcs
- Negotiable
- Bearing FCDP76104300/YA3
- 1 pcs
- Negotiable
- Bearing FC243390/YA3
- 1 pcs
- Negotiable
- Bearing FCDP82120440/YA6
- 1 pcs
- Negotiable