Four row cylindrical roller bearings
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
Bearing features
- Enhanced operational reliability
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film. - Separable and interchangeable
The separable components of SKF four-row cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections. - High speed capability
The cage designs are suitable for high speeds, rapid accelerations and peak loads. - Low cross-sectional height
The low cross-sectional height of four-row cylindrical roller bearings allows for relatively large roll neck diameters compared to the roll diameter.
- Bearing FC3046150
- 1 pcs
- Negotiable
- Bearing FC84124400
- 1 pcs
- Negotiable
- Bearing FCDP152206750A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP100136450/YA6
- 1 pcs
- Negotiable
- Bearing FC2838119
- 1 pcs
- Negotiable
- Bearing FC6688200
- 1 pcs
- Negotiable
- Bearing FCDP6084300/YA3
- 1 pcs
- Negotiable
- Bearing FC3045136/YA3
- 1 pcs
- Negotiable
- Bearing FC5276220
- 1 pcs
- Negotiable
- Bearing FCDP130184680/YA6
- 1 pcs
- Negotiable
- Bearing FCD4462204/YA3
- 1 pcs
- Negotiable
- Bearing FCDP106152520A/YA6
- 1 pcs
- Negotiable