Four row cylindrical roller bearings
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
Bearing features
- Enhanced operational reliability
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film. - Separable and interchangeable
The separable components of SKF four-row cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections. - High speed capability
The cage designs are suitable for high speeds, rapid accelerations and peak loads. - Low cross-sectional height
The low cross-sectional height of four-row cylindrical roller bearings allows for relatively large roll neck diameters compared to the roll diameter.
- Bearing FCD6492240/YA3
- 1 pcs
- Negotiable
- Bearing FC110160560/YA3
- 1 pcs
- Negotiable
- Bearing FC7296290A/YA3
- 1 pcs
- Negotiable
- Bearing FCDP120174640A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP96130460/YA3
- 1 pcs
- Negotiable
- Bearing FCDP122174660/YA6
- 1 pcs
- Negotiable
- Bearing FC5272200/YA3
- 1 pcs
- Negotiable
- Bearing FCD84112400
- 1 pcs
- Negotiable
- Bearing FCD84124400/YA6
- 1 pcs
- Negotiable
- Bearing FCDP100136450/YA6
- 1 pcs
- Negotiable
- Bearing FC3852168/YA3
- 1 pcs
- Negotiable
- Bearing FCDP130184690/YA6
- 1 pcs
- Negotiable