Four row cylindrical roller bearings
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
Bearing features
- Enhanced operational reliability
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film. - Separable and interchangeable
The separable components of SKF four-row cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections. - High speed capability
The cage designs are suitable for high speeds, rapid accelerations and peak loads. - Low cross-sectional height
The low cross-sectional height of four-row cylindrical roller bearings allows for relatively large roll neck diameters compared to the roll diameter.
- Bearing FCDP164232840A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP72108300/YA6
- 1 pcs
- Negotiable
- Bearing FCD4469210
- 1 pcs
- Negotiable
- Bearing FC4054170/YA3
- 1 pcs
- Negotiable
- Bearing FCD4469210
- 1 pcs
- Negotiable
- Bearing FCDP2503301000/YA6
- 1 pcs
- Negotiable
- Bearing FC3246168A/YA3
- 1 pcs
- Negotiable
- Bearing FCD70104300
- 1 pcs
- Negotiable
- Bearing FC3244180
- 1 pcs
- Negotiable
- Bearing FCD70104300/HCYA2
- 1 pcs
- Negotiable
- Bearing FCD5068230
- 1 pcs
- Negotiable
- Bearing FCDP2403401150/YA6
- 1 pcs
- Negotiable