Double inner double row tapered roller bearings TDI
Bearing features
- High load carrying capacity
Because of their second row of rollers, double row tapered roller bearings are suitable for heavy radial and axial loads. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e (→ product tables): the larger the value of e, the larger the contact angle. - Axial loads in both directions
Double row tapered roller bearings locate the shaft in both directions with a specific axial clearance or preload. - High stiffness
Double row tapered roller bearings provide a stiff bearing arrangement. - Low friction
The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear. In addition, the bearings can better maintain preload and run at reduced noise levels. - Long service life
The crowned raceway profiles of basic design bearings and the logarithmic raceway profiles of SKF Explorer bearing optimize the load distribution along the contact surfaces, reduce stress peaks at the roller ends, and reduce the sensitivity to misalignment and shaft deflection compared with conventional straight raceway profiles.
- Bearing 480TDO700-1
- 1 pcs
- Negotiable
- Bearing 400TDO600-2
- 1 pcs
- Negotiable
- Bearing 37746
- 1 pcs
- Negotiable
- Bearing 97524
- 1 pcs
- Negotiable
- Bearing 2097752
- 1 pcs
- Negotiable
- Bearing 950TDO1500-1
- 1 pcs
- Negotiable
- Bearing 2097160
- 1 pcs
- Negotiable
- Bearing 37741
- 1 pcs
- Negotiable
- Bearing 440TDO650-1
- 1 pcs
- Negotiable
- Bearing 850TDO1360-1
- 1 pcs
- Negotiable
- Bearing 240TDO320-1
- 1 pcs
- Negotiable
- Bearing 120TDO180-3
- 1 pcs
- Negotiable