Duplex Angular Contact Bearings
Angular contact ball bearings have a greater number of balls and higher capacities than deep groove ball bearings with the same boundary dimensions and are suitable for higher loads and speeds with proper lubrication. However, because of the absence of a flange on one side of the outer race, they are capable of supporting thrust loading in only one direction. This is why most applications employ two of the same bearing bearings facing opposite directions, often as a duplex pair. To obtain American BAC bearings capable of duplex mounting, they must be ordered “flush ground”, designated by the “G” suffix. “G” basically means “No axial clearance, no preload.” In cases where the tandem mounting is required, another bearing with thrust capability is usually employed on the shaft to take thrust or locate the shaft in the opposite direction as the pair.Duplex bearings are a set of two bearings on a shaft with the inner and outer rings clamped together with preload to attain greater axial and radial rigidity. Duplex bearings also used to achieve additional capacity when insufficient space radially for larger bearings.
- Timken Fafnir MM12BS32 QUH
- 1 pcs
- Negotiable
- Timken Fafnir MMF560BS145PPDM
- 1 pcs
- Negotiable
- Timken Fafnir MM9313WI 5H QUH
- 1 pcs
- Negotiable
- Timken Fafnir MMF550BS115PP DM
- 1 pcs
- Negotiable
- Timken Fafnir MM12BS32 DUH
- 1 pcs
- Negotiable
- Timken Fafnir MM9313WI 5H DUH
- 1 pcs
- Negotiable
- Timken Fafnir MMF515BS60PP DM
- 1 pcs
- Negotiable
- Timken Fafnir MMF535BS90PP DM
- 1 pcs
- Negotiable
- Timken Fafnir MM9316WI 3H QUH
- 1 pcs
- Negotiable
- Timken Fafnir MMN560BS110PP DM
- 1 pcs
- Negotiable
- Timken Fafnir MM45BS100 QUH
- 1 pcs
- Negotiable
- Timken Fafnir MM9316WI 3H DUH
- 1 pcs
- Negotiable